4.9.2.95 28. September 2004 - EasyPlay: Played Break/News entry could not deleted from the playlist - OnAir: If OSD-Fading was Enabled, and there must be a logo on a MPEG-file after a still, there was a short flash back to the still picture - SelectSegment showed the old segment names, if the new file didn't had segment names - !Parallel do have now a Name Tag - Undo was not working anymore after drag&drop - Next Event preview was broken since 4.9.2.92 - In case of excately same event time in every day and days, every day had the higher priority then the days event (this is wrong since 4.9.2.93) - SegmentEditor: If you load a MPEG file with Segment Names, and after that a file with Segements, but without names, the names of the previous file was still visible - MZ: GPI stop is waiting if there is something rendering - Memory leek in In/Out point functionality - some fixes in undo functionality - Default Video levels on first use could be wrong. 4.9.2.94 31. August 2004 - Compiler update - Graphic utiltiy update 4.9.2.93 31. August 2004 - Video Switch was not switching on Still pictures (since 4.9.2.86) - OnAir: VideoLevel Control of SDM290 Series of boards - New next event time calculation - PlaylistEditor do have 10 Undo levels in the Tree and 20 Undo levels in the Playlist - Speed up of reading the Playlist. - Improvment in the timed events - Search in Metadata Manager was only working if the Section name was UserData - LastChange Time in the Metadata was not updated if there was a change made with Metadata Manager - Ignoring of dynamic calculated Inpoints. 4.9.2.92 23. August 2004 - Dynamic Inpoint calculation disabled. Because it do not work on all type of files correct. - Metadata Manager can now handle different sections - ProgressBar show now the progress between In/Out point instead of file begin and Out point - MPEGFiles will checked for zeros on the end of the file. If there are zeros they will removed. - Drag&Drop of Folder from Explorer was broken in 4.9.2.90 - OnAir: DMedia Interface broken in 4.9.2.91 4.9.2.91 15. August 2004 - The In/Out point in !Parallel and OSD Instructions was ignored. - MZ: Visible problem with FullScreen MPEG followed by a normal size MPEG and the opposite way. - Customized List was saved BUT not loaded on start of PlaylistEditor (since 4.9.2.88) - White border in the Play/Pause Button after Service Pack 2 of Windows XP - Graphicutility updated - Faster close of Mplay if the next item is already rendered - Video Server emulation of OnAir improved. (no error message when Remote software is stopped and you would like to load a playlist directly) - Change of canvas writing - OnAir: Automatic Fade out is now working when pressing shift and N-Key (before it was only working when pressing N-Key and used the Mouse) - MZ: WinTV was not fade out and hide if there was a Powerpoint after the WinTV entry. - PlaylistEditor: parfileonly parameter was not working anymore. - OnAir: InsertDirectory will only refreshed if it was already played. - Use of Disable/Enable a item could cause problems (doubled the text) because there was a fault in the disable procedure 4.9.2.90 26. July 2004 - EasyPlay: Fix in the synch control if several channels must play in synch. - OnAir: If there was NO name defined in a GPI event, the Event was recued after play. - OnAir: Not played the Next Event after a GPI instruction, if Mplay was in Cue Mode and the Next Event was NOT a GPI Event. - OnAir: Auto correction of Inpoints on variable Bitrate files. (the first time the inpoint probaly is wrong. on the second should be ok) - OnAir: Init Stradis board second time if first time fail. - OnAir: If there was in front of a GPI-Event a Normal-Event Mplay did start with playing of the first GPI-Event. - OnAir: If there was in front of a GPI-Event a Normal-Event Mplay did reload after a restart until the GPI-Event was arrived the playlist. - OnAir: First_Frame Last_Frame Handling changed. - OnAir: Display fix in the Audio leveling panel in case of more then one board in the system - MZ: WinTV Init and Disconnect/Connect changed. - MZ: Since 4.9.2.87 if there was a Powerpoint Animation as FIRST in the playlist, after a restart of the system, the Powerpoint was playing in the background. 4.9.2.89 08. July 2004 - Playlist 1 Form will be activated after restart. - OnAir: Resume in progress is working now also, if the event was NEVER started before. - OnAir: Click on "Last" Button Mplay jumped one file to much backwards. - Metadata Manager can now open in the Show Panel Menu (if you have the license to use it) - If Metadata Manager was automatically restored after restart, no search folder was set. - Metadata Manager select Search Tab if file not found. - SegmentEditor enable the Save button if the MPEG-file do not include a time at all. - EasyPlay, User Config: Checkbox to select which text and Icon should used for a Break/Package event - EasyPlay: Option package available usful for news room playout. (Audio leveling, router control, Package Mode, Direct Logfile access) - OnAir: Position of Metadata Manager will be saved and restored too. (Save window parameter) - OnAir: Resume in progress was NOT working on the first and the last File in a event. 4.9.2.88 06. July 2004 - Metadata Manager do now load the Metadata emediately if you select a item in the search list. - OnAir: Automatic Resume after Failure - OnAir: Resume in progress (not working in repeat mode) - OnAir: Resume last known position - Reload of Metadata on Cue - "Played" counter in Metadata - Seeking in files with NOT correct MPEG-Headers is better possible. - Serial port handling changes 4.9.2.87 18. June 2004 - OnAir: if Visable Events was >1 and empty events and Instruction without a lengths Mplay skipped events. - MZ: Empty events or only one instruction without a length, Mplay skipped events. - It could happen that after a VideoSwitch instruction, Mplay DID NOT automatically Switch the router to the MPEG Input - Init of HDM500 could fail. - Buffer underrun alarm was to sensitiv in case of bitrates higher 25 MBits. (since 4.9.2.86) - MZ: Changes in the logic to set Full Screen or NON Full Screen (Full screen still then follwed by a normal size still was not working) - Rounding issue. example: Mpeg file of 2999 Frames long was visible as 01:60 instead of 02:00 4.9.2.86 13. June 2004 - After using of "Reload specify time" and Push Play the Next Event was getting lost. Only "Days" was visible. - WaitForGPI improved. - Lost of Router config in Board Tab was possible, after pushed Save and you verified then. - Beta Version of Audio AGC in Mplay for SDM290 Series of Board and Driver 2.xx - PlaylistEditor: Selecting of FullScreen with right click was not saved. - Ignore of Drive A and B when searching for the correct path in MZLayout - Handling of NON-standard MPEG files changed (defect headers, exception for Drop/Non Drop mismatch files) - Remote Control of Mplay over TCP-IP is now more fast - If a event start manually more early then scheduled, then in the Playlist the file was not visible as playing. - Audio level monitoring panel for SDM290 Series of Boards and Driver 2.xx. - Frame rate added to metadata. - If there was a video router connected to Multizone, Mplay sent to many routing instructions. - GPI Start for Multizone start now all Zones. - SendTo Icon changed and it's possible to define a Name. In the playlist is then the Name visible and NOT SendTO - PlaylistEditor reload the Playlist automatically if somebody else on the network change it. If you have made changes you will get warned. - Compiler updated - Automatic Playlist Import was not working correct. 4.9.2.85 20. May 2004 - Sometimes it could happen, that a MPEG-File did get after some plays a wrong file length. - If one time a MPEG File did had the wrong Filelength in Metadata, it was not possible to edit this file correct in the SegmentEditor. - Graphic utility update - InsertPlaylist on Drag&Drop was broken since 4.9.2.80. - Board(s) Tab is now numbered if there are several boards available (every Board one TAB). 4.9.2.84 17. May 2004 - Exception SetDateTime on Stop should not visible anymore - In MZ, If there is following a after a "normal" still a "Fullscreen" still, now the change is improved. - !Set config default video input do now set the router if there are no other stills or mpegs in the event. - In some situations Break mode did selected all breaks as played. But in real they was not. - Handling of additional Data in Playlist changed. Additional data is now automatically visible in as run as well. - Added Infrared Xpander to "Others" list - SendTo it's now possible to define a "visible" length. - Sometimes you could select Fullscreen, but the PlaylistEditor did not changed it. - Mplay can now play Audio only files in the main playlist. - Sometimes on drag and drop from one Scrollbox to the other, it did not drop it. - !ShowCrawl without any configuration could cause a complete crash of Mplay 4.9.2.83 02. May 2004 - Double click on a flash could produce a exception. - sometimes the Save button was not enabled in PlaylistEditor when there was a change made - Ignore Event is replaced with Overtime Checkbox and the possibility that if you unchecked that the software automatically play all events that are not played because of Overtime. - Delete replaced the clipboard content. - Repeat button showed sometimes wrong status. - Error Handeling 3 seconds before a event was disabled since 4.9.2.81 now with modifications reactivated. - In MZ the name of the loaded playlist is now also in the titlebar. (like in EasyPlay and On-Air already) - Wrong file header could cause an PopUp Error Message 4.9.2.82 - If there was in the new event the SAME file name exists like in the old event then Mplay was going to the wrong place. It did not start from the beginning. - Receive of serial port instructions was not working correct in 4.9.2.81 - Cued file was not Blinking anymore (since 4.9.2.80) - Break-Mode somethimes did NOT go to cue. It startet sometimes emediately. (since 4.9.2.80) 4.9.2.81 27. April 2004 - While Layout changing it could happen a Exception in MainThread 3. - Different Start/Stop delays PER GPI config possible - Now it's possible to DELETE items which are BEFORE the actual playing file and Mplay correct internally the actual play pos. - The command line function of PlaylistEditor was broken in 4.9.2.80 - Unselect of a item it self is now possible (not possible since 4.9.2.80) - Changes in serial interface - On a Next Event there was sometimes a Window visible over the Playliste (since 4.9.2.80) - Sometimes there was a Error Message: Unexpected file end in the log. This should not appear anymore. - Right click on a NOT selected item automatically unselect all others and select this one. 4.9.2.80 26. April 2004 - Memory leek in SegmentEditor removed - GPI-TAB Names was loaded only after selection of the TAB - SDM260/280 and HDM500 recognize corrected - New ScrollBox in PlaylistEditor/Mplay, CTRL-A/CTRL-C/CTRL-V/CTRL-X/CTRL-Z (Undelete)/UP/DOWN/SHIFT-Select/CTRL-Select is now possible. - PlaylistEditor Counts *.mpv *.m2v at Insertdirectory and CountLength too. - Use FileTruncation to set File End. - MZ do not save automatically the resized cfg. - Layout change improved. - Length counting of videoonly files in InsertDirectory is now working - If the Break Program/Source Text is "Terminate Break Mode" then Break mode will canceled and last repeating event activated. - Update of a item after use of SegmentEditor improved. - OnAir: "Distance From Top" in User config. - SegmentEditor: Full Size Grab of a Video Frame possible with a right click on the video window. 4.9.2.79 08. April 2004 - In the video router formula (Routers.cfg) it's possible to use ".2h" (necessary for Videotek 12A) - ShowLogo, ShowClock, do have Show and Hide at Frame possibility too. - TCP-IP Remote control possibility improved. - "Delete Tempfiles on Restart" Checkbox removed. - In case of wrong serial cable it could happen, that Mplay was sending every 50 ms a router switch instruction. - until now, Mplay resend at every file change a router instruction, not only when the type of file changes. Now it resend the instruction every 60's file. - Masterplay OnAir: "Snap to Time" button - Graphic utility update 4.9.2.78 31. May 2004 - A picture in fullscreen and after that a HTML page, the picture was still visible. - Sometimes in Multizone a logo was not visible all times. - Initialisation of the parallel port (LPT) improved. - Multizone: Automatic resizing of the stills if zone size is different then before. No delete of Tempfiles necessary anymore. - Changes in WinTV and VGA Logo code. - Parallel Port Properties numbering now from 1 to 8 not 8 to 1 anymore. (in playlist it's showed as 8 to 1 still) - Multizone: ChangeLayout Instruction Beta release. Actually only for Users which are intresst to make some tests. - InsertDirectory: Adds now automatically all sub segments if a file is segmented. - Masterplay on different Computers can now control the same video router. (special cabling is necessary) 4.9.2.77 - Audiojukebox did not saved the first played file to the random list. - !Repeat on top of a Event is valid until there is a !Normal on top of a Event. - Mplaynew.new create a MplayBackup folder and copy Mplay.exe and Mplay.ini in this folder. It adds the Version Number to the copied files. - On start of Mplay it checks for Mplaynew.new and replace emediately if it found it. - Cosmetic "fix" in Break Item, when smallest Icons configured. - PlaylistEditor use now Subdirectories in Searchdirs too. - .Osd files will searched when there is no directory in configuration. But the OSD directory must be added to the Searchdirectories. 4.9.2.76 15. May 2004 - Empty Playlist in Multizone do not cause a crash anymore if you change from Full screen to normal oder the opposite way. - "Close VGA-Window on EOF" remuved. If you push Stop then it will close it anyway. 4.9.2.75 - !Set Config Default Video Input instruction is more easier, and the change will saved to the Inifile. - Empty events can now used. 4.9.2.74 - Picture-InternetPage-Picture-InternetPage. In this situation it could happen, that after the picture the last selected internet page was visible for some frames - Break/GPIMode was not working correct if the Break instruction was in a Subplaylist - Push on Cue Button could fail, if the first MPEG file was shorter then 10 seconds. - Break/GPIMode da have a "Scheduled Time" data field. - SegmentEditor load the frame rate correct. - Clock Panel to show in large letters the next event time. 4.9.2.73 16. February 2004 - Picture Transitions will interupt know, when the stop key is pressed. The result is, that the stop of Multizone is much faster. - The cue of Internet Pages ignore the Cache now. - Channel 2 did not have a number. 4.9.2.72 10. February 2004 - On Multichannel Masterplay ON-AIR closing of Mplay could cause problems. 4.9.2.71 09. February 2004 - !Break and !Wait_ForGPI is now the same functionality. (only different picture) - PlaylistEditor somethimes did not refreshed the times. - If there was audio jukebox enabled, a Stradis board and the Mpeg file is a *.mpv Mplay could crash. - If there was audio jukebox enabled, a Stradis board and Mplay should play in Repeat mode BUT it had nothing to play because of nothing found or empty playlist, Mplay was crashed. - If the first item in the playlist is a !InsertPlaylist instruction, Mplay check this sub playlist for the playmode. - "Default Play Mode" configuration removed. - OSD-Counters did have problems on SDM275 Series of boards. (since 4.9.2.40) - OSD-Counters did have transparency problems on SDM290 Series of boards. (since 4.9.2.36) 4.9.2.70 - Main changes for Multizone. Layout change possible without restart of Mplay. - Set Config instruction show all possible instructions. 4.9.2.42 - DS-8s can used for SerialGPI with Mplay. - The !InsertPlaylist Instruction can handle as source www. or http: addresses as well 4.9.2.41 04. February 2004 - *.Ran Files are in the temp folder of Mplay now. - a weekly list without at least one "everyday" item, was NOT working correct ! Mplay did not reconized the next events. - Mplay double the size of MaxSearchBytesEnd of the Stradis driver, in case of NOT found file length with the default size - A Drop/Non Drop mismatch in a MPEG-File (WinTV files) will not reported anymore as MINOR Error. But it's still written to the logfile as "status" Information. - Memory leek in Error Statistic removed. - Resource leek when starting external programs removed. 4.9.2.40 02. February 2004 - No Error message anymore, in MZ when Internet is not available. Internet is cached. - If you selected an other Playlist with the same edited DATE and Time as before, Mplay did not loaded the new list until it was stopped. - Naming of GPI configuration possible - In OSD configuration it's possible to enable Fade LOGO In/Out (Masterplay ON-AIR). There are limitation when using SDM275 Series of board. - The configuration of Picture Fading after/before MPEG is moved to Picture Configuration Tab in "User" section - The PlaylistEditor show how much time is left until the next event will reached. 4.9.2.39 - More changes in crawl timing for Stradis. - Multizone: WWW pages in other zones then the Videozones was still visible if there was something configured as fullscreen. - For counting movie file length, Mediaplayer will used. - Problem with AudioJukebox when Stradis card used. Since 4.9.2.35 4.9.2.38 - Changes in crawl timing. - cleaning up of RGB to YUV 4.9.2.37 - If there was a logo and after that a crawl, then the logo was visible sometimes for some frames while the crawl was running. - Speeding up of RGB to YUV convert for MasterPlay with Stradis boards. - There was a problem in Multizone since about 4.9.2.20, if there is at the same time in different zones a Webpage - The very old osd instruction set can not be used anymore. Only that one, which are in PlaylistEditor since about 2 years are valid. 4.9.2.36 - the Changes in 4.9.2.35 with the crawl could make some troubles on stradis players. - It was not possible to use the "fout=" time, 10 seconds before the next file - Memory leeks found in !InsertTextDirectory and !InsertPlaylist 4.9.2.35 - Reading of wrong default transparency when loading Picture to OSD - Stradisdrivers 1.24d to f do reconize SDM290/280 wrong. - Use old fading mode on SDM290 because of actual driver limitation. (no audio fade on SDI) - Windows Fader configuration changed - Multizone Hyper-Threading in MplayAccel.exe solved. - Priority of crawl increased - Changes in Audiojukebox 4.9.2.34 - Use of more then 9 Comports possible - Exception on try to write INI-File solved. 4.9.2.33 - SendTo can now send to a TCP-IP destination too. Interface changed - The Automatic Playlist Import after midnight did NOT import the Playlist file of the day before. So it could happen that the events after midnight could get lost. 4.9.2.32 - MplayAccelerator is now behind all other Zones. So you can overlap the videozone with other zones. 4.9.2.31 - The OSD Panel in Mplay do have the same interface like in the OSD Config of PlaylistEditor. 4.9.2.30 - If a MPEG-file was reconized with a defect header, then the outpoints was not working correct working on that file. - Multizone: Full Screen can enabled with right mouse click or with double click on a still. 4.9.2.29 - There was a problem with Inpoint's if Mplay was remote controlled with DMedia 4.9.2.28 - Changes in DMedia handling. - Changes in Meta Data Manager 4.9.2.27 - Changes in SegmentEditor, because of problems with some Software MPEG-Decoders. - Beta Version of "Meta Data Manager" with editing and searching functions. 4.9.2.26 - Changes in SegmentEditor, if there is NO capturing unit available the Grab button is greyed out. - Some small changes in handling of the File information. 4.9.2.25 - In the SegmentEditor the Frame will be grabbed which is select. (before it was only about 15th Frame) - The "Create Icons..." do now SAVE the file length too. The Icon on files shorter then 120 seconds is created one second before the Outpoint. The Icon on files longer then 120 seconds is created one second after the Inpoint. 4.9.2.24 - If there was a Repeat instruction inside of a Normal Mode, and the playlist was changed or the reload button pushed while in repeat, then the wrong Next event time was loaded. 4.9.2.23 - Mplay restore the PlaylistEditor, if you click on Edit when it was minimized. - If the PlaylistEditor is open more then one time, Mplay search for that one which do have open the On-Air list. If no one is open yet, it open one more PlaylistEditor. - Double click on !InsertDirectory do NOT open anymore the Directory. - Push CTRL and double click on InsertDirectory open the Directory. - Push CTRL and double click on InsertPlaylist open the PlaylistEditor with this Playlist. (if this Playlist is already open in a Playlist Editor it shows that one) - In the InsertPlaylist Properties, there is a button Edit. This open the PlaylitEditor. - If you double klick on a Playlist (.in) in Windows Explorer then you can select the PlaylistEditor as Program to open with. 4.9.2.22 - some correction in the init of the Video router after restart. - !InsertPlaylist will be counted in the PlaylistEditor, so you can see how long this subplaylist is. - The !InsertPlaylist form is internally change to the same form like the !InsertDirectory 4.9.2.21 - Actual time/Date is now in the Form Name. - the Actal time can be selected in the time area. 4.9.2.20 - add "End Of Play" to the As Run (Played) logfile. - the first MPEG-File in the As Run had the wrong start time. (When it was Cued and NOT when it was Starting with playing) - Complete new configuration of the Video Routers. Now you can set names for every Output/Input - new version of graphic component 4.9.2.19 - In the file Routers.cfg you could define your OWN Switch configuration, if it is not already integrated. - Audio video Folder is more accurate, because Mplay handle stills now with frames too (before it was only in second). 4.9.2.18 - Some cosmetic 4.9.2.17 - In Masterplay On-Air can be configured now, how many events should be visible in the playlist. - Multizone had a problem if the duration of still was smaller then the effect time of it. - Sometimes could happen that the repeat button was active after restart. This could produce some troubles if the next event was in normal mode. 4.9.2.16 - Mplay import now Summit playlists correct, if in the summit list is a time larger then 24 hour. - Memory leek in !ShowLogo instruction removed. - Memory leek in !InsertPlaylist removed. - Memory leek in !InsertDirectory removed. 4.9.2.15 - If the GPSTimeOffset in the GPS TAB was invalid, all GPS functions are failed. If it invalid, then it is set to 0 now. - In/Out Points in the playlist was correct in the Playlist. BUT not when it was playing On-Air 4.9.2.14 - If the Software is in Stop, The Remain time show now the complete time of the loaded Event. - The End time will recalculated every time when a MPEG-file starts. Like if you push pause and then Play again, the end time will new calculated. - !ShowCrawl from file can now handle more then one Line in the file. Also it reloads the file automatically every time after a line is showed complete. 4.9.2.13 - Timing issues solved when a MPEG-File is finished inside of the fade out time, to the next Event 4.9.2.12 - Multizone: Changes in the crawl. - Masterplay On-Air: did not attached anymore a separated audio file to a video only file. - Played Logfile had sometimes double filename entries. (since Version 4.9.2.7) 4.9.2.11 - In/Out Points in the Playlist are Master. If is in the Playlist like this test.mpg[--.--.--.-- 00:00:10.00] then the Inpoint of the SegmentEditor will be used othervise NOT - Summit Import was a problem when there was no Video Source defined. 4.9.2.7 - Next Event was 3 Seconds to early if there was NOT a MPEG-file the first file in the playlist. - If Master Video Out and the Default Video Input was defined, then the !Video set Only instruction could be overwritten by the defaults. - If there was a !Video set only instruction the last item of a Playlist, Mplay could crashed an the instruction was overwritten by the default. 4.9.2.6 - Fade out Time can be set to 0 - No Fade if the last MPEG file ends less then two seconds before the next Hard Time. - If there is NO Still or MPEG file in the next Event, the Hard Time is now working correct too. 4.9.2.5 - Fix of Break Mode. Break Mode was not working inside of Time events - Fix not sending all characters from Display.cfg to the serial Port 4.9.2.2 - Fix of crawl in a loop. 4.9.1.48 - Wrong sorting order in tree. - over GPI was not possible to play again after pause 4.9.1.47 - Problem with Cue Button solved - changes in Break Mode. After complete play of a Break, next Break will be selected. - Only a number as Break name can be used in the Break Mode now as well - Precue time decreased to 2 seconds - Refresh of Playbutton improved 4.9.1.46 - Licensing changed a little bit. - Status string changed - Automatic Software update improvement - MplayAccel will be terminated direct now. - Configuration will be loaded only once. 4.9.1.45 - Multizone config (ZoneEditor) is at a new Place: Configuration/Multizone - MplayAccel do not make overscan anymore, if the video window is fullscreen 4.9.1.44 - VOB files can now used without renaming to MPG. - !InsertDirectory do not ignore anymore the times in the filenames. - Resizing of the Zones changed before and after a Fullscreen instruction. - Memory leek in DMedia interface removed. - Fadeing out could crash mplay in rare situations. - True Color OSD with SDM290 now possible - There was a fault in OSD resizing control. The Bitmap will be cropped correct now. - VGA EasyPlay and MasterPlay use MplayAccel now too. - Version 4.9.1.43 and 4.9.1.42 had a problem with exception events. 4.9.1.43 - In Sync Mode=File, the osd was not be automatically reseted on the next event. - There was a problem with "00/00/0000 00:00:00" and "00/00/0000 00:00:00 every xx:xx:xx" - Automatic reboot delay enhanced. - Wrong communication pipe names was used in case of several MPEG's at the same time. (MplayAccel) - Audio (of MPEG files) on channels higher then 1 will be muted. (MplayAccel) - MplayAccel sometimes closed with 10 seconds delay. - Memoryleek when files drag&dropped to the playlist. - Logos in Multizone now working. The Logos in MZ can be true color. - If there was after flash or WinTV (with level 0) a mpeg-file, then the audiojukebox was still playing. - No Multizone display visible between a fullscreen flash and a fullscreen MPEG. - Monochrombitmaps are working now too. - No error message anymore on Mplay closing, if there is a WinTV installed - Auto cue prior of starting to play (Not in Multizone) ("Execute instruction on cue" should be disabled) - MplayAccel make now a 3% overscan 4.9.1.42 - After a MPEG file it could be happen, that the WinTV was not visible - !InsertTextDirectory new layout. Mplay reconize the old style still BUT NOT the PlaylistEditor. - Mplay/MplayAccel do not cue anymore a mpeg and then play. It goes now direct to play. Except if there is a inpoint. - MplayAccel has now Mplay as ParentWindow. - Quicktime is playing again. But there is NO resizing of the window possible yet. - If was after a still a powerpoint, WinTV or Quicktime, the audio jukebox and the still was not fading out - DMedia can now used for still pictures as well together with Mplay... - With enabled OSD Fading, it could happen that after a still a MPEG-file would be played with no picture - Single Events sometimes interpreted as weekly event. This could confuse Mplay very much. (in the extrem situation it could crash) 4.9.1.41 - Windows Mixer do not fade out anymore on *.mpo and *.mpv files. - When stop click on a MPEG file, the Windows Mixer set then to external audio. - Logfile directory can now have spaces as well. - If WinTV after MPEG then WinTV was only black - Internet *.php extensions can be used - Sync Mode "File" is working again. (List is still not working) - External Audio will be fade out now, if WinTV's volume is larger then 0 - "Render while playing MPEG" is now automatically DISABLED in VGA applications othervise ENABLED - The !Instractions in VGA mode will be now executed at the correct place - The Powerpoint watch dog can be disabled in the PLUGins TAB - Play instruction in Multizone Mode changed - Every in Everday is now usable. (but not usable in the other levels) - Flash after still now visible. - Background in Multizone will load now also if there only MPEG-playing in the zones - Emergency possibility with RTF file. Mplay play the Emergency RTF if there is text in the RTF resume normal playback when text is removed. - While transitions are running, the timers are now still visible counting. - Audio fade out/in is now much better because resized the "critical" sections in the threads. - Read ScreenResolution from zfg file. - Internal antializing in Multizone enviroment disabled. (MUST be done with graphic card) - Include directory in tempfiles enabled always. - Graphic utility updated - If is in the first line of a RTF a still picture like test.bmp then this will used as background. - In Multizone, the first zone will be activated automatically on program start and on play. 4.9.1.40 - Drag&Drop of instructions can be used now from Windows Explorer as well - Double Click on a Playlist item, do not start anymore a drag&drop process. - If Excecute instruction on Cue the video switch will be switched on the cue too. - Decoding while a file is still encoding, there result now no Freeze message anymore. - Default WinTV color configuration possible in board configuration TAB - Compatible with stradis driver 1.20 and later 4.9.1.39 - On Drag&Drop into the Mplay/EasyPlay you will now ask which segments should be add - several fixes when working with SegmentEditor and saving/changing of data. - several NTSC related problems fixed. - PlaylistEditor count the last file in the list now too. - Offset for NTSC removed in SegmentEditor - New resizing technologic (important for Multizone) - Inpoints on VGA-Players now possible (Because limitation of DirectShow, the first Frame of the Video could be visible anyway) - Break mode Auto cue possibility. No auto cue, if stop was clicked. - The Break will only marked as played, if the correct end is reached. (Click on stop is a uncorrect end) - Some changes in the !InsertDirectory instruction. R and RSXX should NOT used anymore. Is replaced with Random=1 and SelectRandom=XXX - Double Click on a !InsertDirectory will open now the directory also when there are options selected. 4.9.1.38 - The content of the last Event in a weekly list on Saturday night would ignored. - OSD Panel interface changed. Logos are now working as well. - With right click, any line can be maked to memo. (usfully for temporaly disable) 4.9.1.37 - changes in !ShowLogo instruction. 4.9.1.36 - Some changes in the handling with MplayAccelerator - Initalisation of Mediaplayer changed. - !ChangePlaylist use now automatically by default the Playlistdirectory - Some changes of fading audio when the WinTV is in use. - OSD interface changed, requires new configuration. Old configuration will be saved into the OSD directroy and starts with Defaultxxx.osd - Multizone rendering timings changed. 4.9.1.35 - New version of graphic engine - !ChangePlaylist instruction is working again. 4.9.1.34 - Disable/Hide Button in OSD-Panel - Definitions changed of OSD-Configuration. Please verify the configuration 4.9.1.33 - Dynamic Next Event is now possible, recalculation is possible with reload of play list or with right click on the Next Event Time. - Old software surface style is removed. - Timing problem in Multizone solved. Sometimes it was possible, that the wrong still was showed in the wrong zone. 4.9.1.32 - Audio only playing error Messages removed when there is a Stradisboard. - SinglePlay mode is now working with stills as well. 4.9.1.31 - Mplay stopped playing, if weekly list stopped if there was no time event at Saturday Night 00:00:00 4.9.1.30 - PlaylistEditor count now also the times of !InsertFile and !InsertDirectory instructions - Cue first Frame (Enable/Disable possible) - let showing last Frame after play (Enable/Disable possible) - PVW mode is working again - Increased the AudioPTSSearchWindow, eliminate the drop of audio frames in SoFT synch mode. - Search directories with timeouts will be automatically temporarly removed. 4.9.1.27 - SegmentEditor korrigiert directX timecode offset. - XML import für Wetterdaten 4.9.1.26 - Hauppauge channel selector bug removed - Mplay gibt nun wieder eine Korrekte Antwort bei BETAEmulation 4.9.1.25 - Bei Verwendung von Stradis UND der Umschaltung auf VGA, wurden die grössen falsch interpretiert. - Keine Scrollbars und kein Rahmen mehr bei HTML Pages - Mehrere Flashs in verschieden Zonen funktionieren nun. - Bei Internet pages, wird nun auch auf "www." "http:" geschaut. --> irgend welche Endungen sind nun zulässig 4.9.1.24 - Sehr wichtiger Graphic utility update. betroffen waren 4.9.1.18 bis 4.9.1.23 4.9.1.23 - Es dürfen nun auch mehrere Punkte im Filenamen von Standbildern sein. - MplayAccel schliesst sich automatisch wenn länger als 10 Sekunde keine Kommunikation - Das Set to Overscan wird nun während den ersten 120 Sekunden nach dem System Start ausgeführt - MplayAccel übermittelt Tastatur Eingaben an Mplay - Das 1. MPEG-File hinter einem WinTV-Befehl ist nun auch sichbar. - Fullscreen von WinTV 4.9.0.14 - Clientsocket ersetzt. Neu kann kann bei z.B: dem DIGIMiX Ziel auch ein Name angegeben werden anstelle der IP-Adresse 4.9.0.10 - Statusabfrage per TCP-IP ist möglich. 4.9.0.7 - Beim Datei kopieren, wird die zwei Sekunden Differenz zwischen WindowsNT/2000 und Windows98/ME ignoriert. 4.9.0.6 - Bandsteuerung über arbeitet. - WetterStationsprotokoll Schiltknecht dazu gefügt. 4.9.0.5 - Wird bei der Stop, FF, RW gleichzeitig die Shift-Tastegedrückt, dann wird vor der jeweiligen Funktion der Ton ausgeblenet in der in den Einstellungen angegebenen Zeit. 4.9.0.2 - Beim InsertTopinDirectory werden immer zuerst die bmp's gezeigt und erst danach die MPEG-Files. So gibt es "nur" noch maximal zweimal schwarz in einem Durchgang. - Stradis-Treiber 0.80 und höher werden unterstützt. 4.9.0.1 - Optibase Befehl welcher nicht richtig funktioniert ersetzt. Probleme beim Wechsel von Standbild auf Bewegbild verbessert - Wenn während dem Renderen eines Bildes der Nächste Event kam, konnte dies zu einem Absturz führen. Egal ob JPG, TGA, REN, MAP . - Während dem rendern des nächsten Files wird das Bedienfeld disabled. So wird verhindert, dass der User einen Crash provozieren kann. - Beim der temporären Dateiverwaltung, kann nun angegeben werden, ob ein Teil des Original Verzeichnisses in im TempFilenname verwendet werden soll oder nicht. Dies kann bei Powerpoint exportierten JPG-Files gebraucht werden. Es wird aber Emfohlen, die Dateiversandsoftware zu verwenden, um eindeutige Filenamen zu erhalten. - Bei MAP wie auch REN Files verschiedene Crash Unterdrückungen eingebaut. z.B: Vorherige Versionen sind abgestürz, wenn zuwenig Zeilen in den Sourcefiles vorhanden waren... - Beim beenden von Mplay, wird nun mit dem Beenden gewartet, bis allfällige Renderungs- oder Filewechsel Vorgänge beendet sind. So treten auch beim Multi-Player beim Beenden der Software keine Crashs mehr auf. 4.9.0.0 - Layout Anpassungen. - Anpassungen für Dualkarten Modus bei Stradis. 0 Frames schwarz - Und vieles mehr 4.8.5.6 - Die Defaultinput Konfiguration hat eine Möglichkeit mehr. 4.8.5.5 - RealtimeClock definition geändert. Die Zeit als Internet Zeit ist nun die Option 6 nicht mehr die 1 - Die Internet Zeit wird nun auch bei den Countern richtig dargestellt, wenn die diverenz unter einen Tag geht. - Wird im Menu "Ansichten", die schon angewählte nochmals gewählt, dann wird diese wieder deaktiviert. - Überarbeiten der OSD-funkionalität. - Vieles angepasst an Helpfile. - Sehr viele Details bearbeitet. 4.8.5.4 - Problem behoben wegen Normal mode auf Normal mode. Dieser Fehler hat sich beim DualPlayer so ausgewirkt, so dass er mehrmals den selben Event spielte. - Für die neuen Karten, sind die Treiber Installation_2_1_8.zip mindest Voraussetzung. 4.8.5.3 - Wenn nach einer InternetSeite KEIN Mpeg kam, wurde das Internetfenster nicht geschlossen. 4.8.5.2 - Voraussetzung dass die Neue Software überhaupt auf den neuen Karte läuft sind die Treiber der Installation_2_1_5.zip !!! - Die Berechnung des Lautstärkepegels der neuen Karte wurde angepasst. --> Es braucht eine neue Kalibration des Tones. - Problem beim Fadeout mit DMedia behoben. 4.8.5.1 - Die OSD-Funktionen sind nun auch für die neue MPEG-Karte integriert. - Bei den Static-Logos, können nun *.bmp Dateien angegeben werden. Die Farbe Schwarz wird transparent. - WeatherConditions-File muss nun nicht weatherConditions.txt SONDERN WeatherCondtions.ren heissen. 4.8.4.5 - TGA-Files können wieder verwendet werden. - Bei TXT-Files werden die meisten Einstellung von StillpictureConfig nun auch verwendet. - Durch das Korrigieren des Flackerproblems (4.8.4.3) ging nachher beim DualPlayer der Cue Befehl wie auch der von Hand start nicht mehr. 4.8.4.4 - Wenn nicht Autocue, dann wurde bei Drag and Drop der Playbutton nicht aktiv. - Wenn Files kürzer sind als 50 Frames, werden sie NICHT mehr gespielt ! Es erfolgt im Statuslog ein demensprechender Eintrag. - Die DMedia Artist Umwandlung angepasst, wegen dem & Zeichen Problem. - Wenn mit Drag and Drop files auf Mplay gezogen werden, und man befindet sich auf der Playliste, werden die gedroppten files vor dem gewählten Eintrag platziert. Ist man neben der Playliste, dann werden sie einfach am Ende der Liste angefügt. - Datum Eintrag 80.00.0000 eingebaut. Kann gebraucht werden, wenn man Tages unabhängig arbeiten will mit Berücksichtigung des "change day", und jeweils mit dem !ChangePlaylist, die Tage wechselt. Bei dieser Funktion, ist die "change day" Zeit etwas vom Wichtigsten. Die Zeit MUSS gleich sein, wie der Zeitevent in dem der !ChangePlaylist Befehl kommt. - ExportSpezialSize Parameter bei RTF-File eingebaut. Damit können alle Files die mit dem RTF-Format arbeiten wie Maps, Ren, RTF zusätzlich in ein anderes FileFormat (Bmp,JPG) und Grösse gewandelt werden. - RGB/VGA-Output mode eingebaut. Dieser legt sämtliche berechneten Bilder in der Bildschirmgrösse im BMP-Format im Tempverzeichnis ab, und stellt sie nachher nicht nur am Pal Ausgang dar, sondern auch auf der Internen Grafikkarte dar. - Beim RGB/VGA-Output kann die Grafikkarte (Monitor) angegeben werden, welcher für die Ausgabe verwendet werden soll. - PlaylistEditor hat bei "Neu" ein Auswahl Menu. - MasterPlayer: Fehler beim Abbrechen von Sendungen gefunden wenn der nächste Event erreicht ist, und das letzte File auf der 2. Karte abgespielt wird. 4.8.4.3 - Die Einschränkung, zwei Sekunden vor einem Eventwechsel darf kein Filewechsel mehr stattfinden, ist nicht mehr. Sie wird gelöst, in dem kein Wechsel gemacht wird, sonderen das spielen abgebrochen wird, und dann mit dem nächsten Event fortgefahren wird. - Beim Dual Player flackerte die Zeit, wenn das letzte File in der Playliste auf dem 2. Kanal gespielt wurde. 4.8.4.2 - Bei nur Standbildern, wurde auf Wiederholmodus gestellt (auch wenn die Playliste als Normalmodus definiert war), wenn am Schluss der Playliste eine Instruktion war. - Um Problemen beim Outpoint vorzubeugen (Nur SingleCart Mode), werden nun beim SingleCart Mode Outpoint's welche näher als 2 Sekunden dem File Ende sind, ignoriert. - Neuer Befehl: !ChangePlaylist. Damit kann am Ende eines Events auf eine Andere Playliste gewechselt werden. Z.B. Beim Tageswechsel. 4.8.4.1 - Beim PlayListEditor die unnötige Errormeldung welche beim 7 Tag Rhytmus kommt entfernt - Der PlaylistEditor übernimmt nun die default Display time von Mplay - Beim Rendern, kann nicht mehr die Stop-Taste gedrückt werden (Verhinderung eines Absturzes unter 95/98) - JPEG, BMP, TIF werden nun auch vor gerendert - Die temporären Datein enthalten nun zur Unterscheidung im Namen auch noch den letzten Teil des original Pfades - Fehler beim refresh der Playlisten beim Mplay behoben. Es wird nun wieder der richtige Eintrag nach dem Refresh angewählt. - Bildaufbau beschleunigt, beim PlaylistEditor wenn grosse Playlisten verwendet werden. - Die Funktionen !InsertDirectory, !InsertTextDirectory und !InsertFile wurden die Refreschung stark verbessert. Auch was das sofort updaten anbelangt. Die Befehle werden nun jedesmal wenn sie in der Playliste auftreten, neu eingelesen. - Bei den Insert Befehlen erscheint nun eine Farbe zur Zugehörigkeit. Einge Fehler darin wurden auch noch behoben. (z.B. Absturz bei löschen eines Eintrages in einer Unterliste) - Wenn die Standbilder auf +-2 Pixel genau sind, wird die grösse nicht mehr angepasst (Wegen des schärfen Verlustes) - Wenn nach dem NextEvent nachher keine Files mehr drin sind, stürzt die Software nun nicht mehr ab. - Die Videoswitch Eingangs/Ausgangs Definitionen müssen neu gemacht werden ! man kann nun für jede Karte separiert Default Input, MPEG Input und Master Output definieren. - Es ist nicht mehr zwingend, das bei den Search-Verzeichnissen mindestens ein Verzeichnis angegeben ist. - Wenn ein *.mpg file nach *.mpo umgenannt wird, dann wird der Audiofader nicht umgeschaltet, obwohl das MPEG-File eigentlich Ton hätte. 4.8.3.2 - Udpate des Serial-Tool - EasyPlay Autostart funktioniert nun auch OHNE irgend ein Angabe eines Parameters - Einkarten Player, können nun auch In Points. - PlayListEditor, hat nun einen Menüpunkt "Öffnen". Wird so eine Playliste geöffnet, wird auch gleich das *.in Verzeichnis in dieses Verzeichnis gesetzt. Gleiche gilt auch bei "Speichern unter". Zurück kann man mit den gleichen Funktionen, oder über den "ONAIR" Button 4.8.3.1 - Refresh bei der Playlistencombobox funktioniert nun richtig. - PlaylistEditor: Die Länge der Standbilder, wird nun auch zur Gesammtzeit addiert. - PlaylistEditor: Wird im TextModus nichts angewählt, wird die GESAMMTE Playliste durchgescannt mit Stop kann abgebrochen werden. - Unter Ansicht, kann nun direkt das Statuslogfile/Playedlogfile geöffnet werden. In den Einstellungen, dann ein Editor angegeben werden. Default ist Notepad - Die Funktionen Sisag, Visiorama sind komplett geändert. (viel mehr Möglichkeiten) Sisag.txt und Visiorama.TXT gibt es nicht mehr. Es heisst nun .ren (Render) Alles was konfiguriert werden muss/kann muss in diesem File gemacht werden. Nur noch sehr wenig, kann in den Einstellungen gemacht werden. - Die Funktion 5DayWeather ist etwas angepasst worden, sie erscheint nun auch als toRender und wenns berechnet ist, auch mit dem ICON - Trimming erweitert 4.8.2.1 - Definition der Aus/Einblend Zeit ist nun möglich - Der AudioBox kann eine Playliste/Karte zugewiesen werden (Dann werden die Fadebefehle auch nur von dieser Liste beachtet) - Layout beim EasyPlayer angepasst. - IniFile ausgemistet. Versionen älter als 4.0 müssen zum Teil neuconfiguriert werden. - Parallel Port Befehl wieder aktiviert. - Die Bildfunktionen werden schon gerendert bevor sie dargestellt werden. 4.8.2.0 - Fehler bei InsertTextDirectory, mit den Introbildern. korrigiert - Wenn der nächste Event kommt, wird nun im aktuellen Balken auch der richtige Filenamen angegeben (nicht derjenige vom letzten File) - Beim nächsten Event Fadeout funktioniert nun auch mit der FadeBox. - Layout von PlaylistEditor etwas geändert. 4.8.1.6 - Audio Switch (Einstellungen/Ports) heisst neu Audio control ! falls ein Audio Switch installiert ist, muss dies auf Audio control geändert werden. - Es wird nun die Audio MixerBox ASF_m_Box unterstützt. Um feine Ton-Übergänge zu externem Sound zu machen. - Memory leek behoben, welcher durch den Icon-Modus entstanden ist. - InsertTextDirectory kann nun auch im Auffuellmodus File angegeben werden. - PlaylistEditor hat nun einen Knopf, um jederzeit wieder die OnAir Playliste zu laden. (Ohne den lästigen Neustart) 4.8.1.5 - Die default Icon Grösse, wurde auf 33x44 Pixel erhöht. 4.8.1.4 - Fehler beim Tageswechsel bei 99.99.9999 gefunden und behoben 4.8.1.3 - Die Icons werden nun im temporären Bilderverzeichnis gespeichert. --> In der Playlist erscheinen die "richtigen" Bilder nun auch nach dem Playlistwechsel. (vorausgesetzt das Bild wurde wirklich schon mal gerechnet.) - Darstellung der Oberfläche etwas geändert. - PlaylistEditor and den Icon Modus angepasst - PlaylistEditor besseres Drag and Drop verpasst. Auch im TextModus. - PlaylistEditor kann nun: NEU, Speichern, Speichern unter, Löschen 4.8.1.2 - Wird die Wiederholtaste gedrückt, wir auch gleich das Abspielen gestartet. (falls was zum Abspielen da ist) - Bilder die eine falsche Auflösungen haben werden nun automatisch auf die richtige Pixel Anzahl umgewandelt und im Logfile rapportiert. - Wenn Mplay über die Tastatur Befehle entgegen nehmen soll auch wenn es nicht im Fordergrund ist, dann kann nun bei den Shortkeys Einstellungen Forced angewählt werden. (Aber Achtung es wird auf jeden Tastendruck reagiert auch wenn im PlaylisteEditor etwas geschrieben wird dann wird auch das Mplay gleichzeitig gesteuert ! - Manchmal war nach dem Stop ein Eintrag gelb, dieser Fehler ist behoben. - Es ist nun möglich Time events zusetzen, welche kein Bild oder MPEG beinhalten. z.B: Es soll einfach um 18:00 der VideoSwitch auf eine bestimmte Stelle geschaltet werden. (Vorher gabs ein Absturz, wenn nicht mindestens ein Bild oder MPEGfile in der Playliste war) - StandBilder, werden sobald sie das 1. Mal gespielt werden, in der Playliste von Mplay mit ihrem ICON versehen. Sobald aber die Playliste neu eingelesen wird, sind die ICON's verloren. - Die Icon grösse kann zwischen 44x33 und 64x48 umgeschaltet werden bei Einstellungen/MPlay/LargeIcons 4.8.1.1 - Es ist nun möglich grafisch Bergbahnen, und Wanderwege darzustellen, über das File mapstatus.ren. (render) - Das StradisDecoder.dll darf nun im Mplay Verzeichnis weggelassen werden, wenn es schon im System32 Verzeichnis vorhanden ist. - PlaylisteEditor wurde mit *.TXT.ren erweitert - Beim Auffuellmodus wird beim Neustart nicht mehr den letzten Event geladen sondern wieder den "richtigen". - Wenn bei der update Taste die rechte Maustaste gedrückt wird, und dort "load spezial time" an wählt, kommt ein Eingabefeld, wo man die gewünschte Zeitangeben kann, welche geladen werden soll. Es wird aber (falls Play gedrückt wurde) trotzdem beim nächsten "richtigen" Event abgebrochen und dann wieder bei der richtigen Zeit weitergefahren. 4.7.6.13 - Der !InsertTextDirectory Befehl, wurde etwas erweitert: Bis anhin lautete er: !InsertTextDirectory c:\testdir from: 300 to: 900. neu fallen die lästigen Doppelpunkte weg: !InsertTextDirectory c:\testdir from 300 to 900. Es funktionieren aber weiterhin beide Schreibweisen. Es wird aber nur noch die Neue empfohlen. - Das Version.txt file wird ins Infofeld gelesen. (falls vorhanden) - Der PlaylistEditor hat folgende neue Funktionen: Löschen eines Infiles, und Speichern unter. Die Playlisten werden nacher neu eingelesen --> Es braucht kein Neustart mehr des PlaylisteEditors nach Eröffnung einer neuem Inifile. - Mplay braucht nicht mehr neu gestartet zu werden, wenn neue Playlisten im Verzeichnis sind. Rechte Mousetaste beim Dropdownmenu wo die playlisten sind, und dort kann dann Refresh angewählt werden. 4.7.6.12 - Der Befehl !InsertTextDirectory funktioniert nun auch im IconModus und wird auch dort in der IconBefehlsliste aufgelistet. - scheint USA tauglich zu sein. - sonstige Feinheiten 4.7.6.11 - Es gehen nun immer beide Befehle (English und Deutsch) man kann also in der Playliste mal !Wiederholen schreiben oder !repeat ist föllig egal. - Der Playlist Editor holt sich die Sprache von Mplay, und stellt auch dementsprechend um. - Beim !InsertFile Befehl wird die langgewünschte Verschachtelung möglich. Ich lasse aber nur 9 Verschachtelungen zu !Dd.h. Wenn ausversehen ein File sich selbst aufruft, dann ist spätestens nach 9 Inserts fertig. Beginn der Versions Protokollierung bei 4.7.6.11.